1 Series E87 118d (M47T2) 5-door
13 62 531
Replacing coolant temperature sensor
(M47TU / M47T2)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Switch off ignition
•
Disconnect battery negative lead
•
Remove intake air manifold
Recycling:
Catch and dispose of escaping coolant.
Observe country-specific waste-disposal regulations.
Unlock plug (1) and remove.
Remove temperature sensor (2).
Tightening torque 13 62 2AZ
.
If necessary, top up coolant.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing coolant temperature sensor (M47TU / M47T2)
BMW AG - TIS
18.01.2013 08:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -