1 Series E87 118d (M47T2) 5-door
Attach an auxiliary lead (1) to hose pack (2) through service
opening.
The auxiliary lead is pulled through with the hose pack towards the
left and facilitates subsequent reinstallation.
Installation:
Make sure when pulling through the hose pack that the tank
ventilation system in the tank tunnel is not damaged.
Release screws (1) and remove cover (2) from left side of fuel
tank.
Disconnect plug connection (1).
Unlock quick-release fastener (2) and detach line towards front.
Unlock quick-release fastener (3) and detach line towards top.
Important!
Do not use any tools to release the quick-release fasteners.
Release screw cap with special tool 16 1 020 and remove
service cap.
Installation:
Procedure for tightening screw cap, see next work step.
RA Removing and installing or replacing fuel gauge sensor (diesel, left)
BMW AG - TIS
18.01.2013 08:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
