1 Series E87 118d (M47T2) 5-door
Release screws (1).
Tightening torque 23 00 1AZ
.
Supporting transmission:
Support with special tools 23 4 050 , 23 0 132 and 00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
Remove screws and nuts.
Remove cross-member.
Tightening torque 23 71 1AZ/ 2AZ
Lever out retainer (1).
Disengage shift rod (2).
Installation:
Grease shift rod.
Grease,
Refer to BMW Service Operating Fluids.
Make sure shims (3) are in correct position.
RA Removing and installing transmission (GS6-37DZ) M47T2
BMW AG - TIS
18.01.2013 09:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
