1 Series E87 118d (M47T2) 5-door
Release screw on special tool 23 3 151 .
Push special tool onto drive shaft and screw into sealing ring.
Insert screw into special tool 23 3 151 again and continue
turning until sealing ring is pulled out of transmission housing.
Installation:
Coat sealing lips of radial seal with gear oil.
Push radial seal (1) onto drive shaft up to housing.
Drive in radial seal (1) as far as it will go with special tool
23 3 152 and plastic hammer.
RA Replacing radial shaft seal for drive shaft (GS6-37BZ/DZ)
BMW AG - TIS
18.01.2013 09:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
