1 Series E87 118d (M47T2) 5-door
32 43 010
Removing and installing/replacing control
unit for active front steering
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove front left wheel arch cover (rear section)
Release screw (1) and remove grounding cable.
Unlock plug (2) with a suitable tool and detach.
Open cable tie (arrowed).
Unclip cable holder (4).
Unlock plug (3) with a suitable tool and detach.
Installation:
Replace faulty cable holder (4).
Unscrew nut (1).
Tightening torque 32 43 1AZ
.
Release screw (2).
Tightening torque 32 43 1AZ
.
Remove active front steering control unit (3).
RA Removing and installing/replacing control unit for active front steering
BMW AG - TIS
18.01.2013 10:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
