1 Series E87 118d (M47T2) 5-door
Important!
Cut outer metal sheet only.
Measurement a = approx. 80 mm from middle of lower lock striker screw point
Measurement b = approx. 110 mm from centrepoint of hole dia. 25 mm
Open weld joints in areas (1).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffle (2).
-
Weld in reinforcing panels at all severance cuts.
View from underbody:
Open weld joint in area (1).
Note:
Drill through 2 plates.
View from interior:
Open weld joint in area (1).
Note:
Drill through 2 plates.
RA Replacing rear left side panel (partial replacement, door opening)
BMW AG - TIS
18.01.2013 11:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
