bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

17 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo|Page 1469 > < 16 RA Removing Window Cavity Cover Strip With Special Tool 00 9 324 At Front Or Rear|Page 1467
Page 1
background image

51 21 170

Removing and installing or replacing outside
handle from left or right front door

Necessary preliminary tasks:

Remove cover on outside handle

If necessary, lay outside door handle light (1) slightly to one side.

Pull out outside handle (2) and feed out in direction of arrow.

Version with Comfort Access/CA:

Carefully feed out outside handle (2) and disconnect associated
plug connection.

Installation:

Locator (1) must not be damaged.

 

Version with Comfort Access/CA:

Seal (2) must not be damaged.

Installation:

Seals (1 and 2) must not be damaged.

If necessary, pull lock actuator (3) outwards until it engages
retaining clasp (4).

Install outside handle and insert correctly into lock actuator (3).

Outside handle is in the correct position only after the cover has
been fitted on the outside handle.

Carry out function check only with door open.

RA  Removing and installing or replacing outside handle from left or right front doo

BMW AG - TIS

18.01.2013  11:42

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

17 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo|Page 1469 > < 16 RA Removing Window Cavity Cover Strip With Special Tool 00 9 324 At Front Or Rear|Page 1467