1 Series E87 118d (M47T2) 5-door
51 32 170
Removing and installing / replacing door
window glass, front left or right
Note:
When removing door lock, it is not necessary to remove window
cavity cover strips or seals.
Necessary preliminary tasks:
•
Open door window to 105 mm.
•
Remove sound insulation in front door
E87 only:
•
Remove outer window cavity cover strip
E90 only:
•
Remove inner window cavity seal
Door window glass (1) must be opened to dimension (A).
A = approx. 105 mm
Important!
Disconnect plug connection (2) from power window
motor (3) (risk of trapping).
Lever out catches (4) with screwdriver (5) in direction of arrow.
Installation:
Catch (4) must be correctly clipped into place.
Carry out function check on power window unit and anti-trapping
protection.
If necessary, normalize power window unit.
Installation:
Following parts of window guide (3) must not be damaged or
missing:
1
Catch
2
Buffer stop
RA Removing and installing / replacing door window glass, front left or right
BMW AG - TIS
18.01.2013 12:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
