1 Series E87 118d (M47T2) 5-door
Installation:
Armrest:
-
position on door trim panel (1)
-
secure at front and rear with repair screws (2)
-
align until bores (3) are centrally located
-
tighten down, starting in middle
Tightening torque 51 42 6AZ
.
Note:
If bores (3) have not been correctly drilled through, increase
tightening torque according in order to ensure that armrest is firmly
seated.
RA Removing and installing/replacing armrest on left or right rear door
BMW AG - TIS
18.01.2013 12:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
