1 Series E87 118d (M47T2) 5-door
51 48 070
Removing and installing/replacing sound
insulation on left or right rear door
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove rear door trim panel
Using special tool 00 9 317 , lever out sealing bead (1) of
sound insulation (3) completely or if necessary partially.
Feed wires (2) out of sound insulation (3).
Installation:
Ensure clean bonding and that there are no leaks at sealing bead.
Installation:
In case of replacement or partial detachments, lay butylene tape
(sourcing reference: BMW Parts Service) depending on the
conditions on inner door panel or sound insulation.
Seal cable penetrations with butylene tape.
RA Removing and installing/replacing sound insulation on left or right rear door
BMW AG - TIS
18.01.2013 12:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
