bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Headliner (with Slide_tilt Sunroof)|Page 1713 > < 2 RA Removing And Installing_replacing Headliner (without Slide_tilt Sunroof)
Page 1
background image

51 44 011

Removing and installing/replacing headliner
(with slide/tilt sunroof)

Necessary preliminary tasks:

Remove sun visors and counter supports on left/right

If necessary, remove both mirror lights

Remove ceiling light (front)

Remove trim panels for roof pillar at front left/right (A-pillar

trims)

Remove all handles

Remove trim panels for door pillar on left/right (B-pillar trims)

Remove trim panels for roof pillar at rear left/right (C-pillar

trims)

Remove ceiling light (rear)

Remove storage compartment

Remove left front seat

Version with dividing net mounts:

Remove all dividing net mounts (3).

Open protective cap (1).

Release screw (2) and remove dividing net mounts (3).

Installation:

Pay attention to position specifications on reverse side of dividing
net mounts.

Important!

When removing, do not touch edges of headliner.

Move seat back of right front seat to maximum rear position.

Tilt rear seat backs forward.

Release expander rivets (1) and (2).

Detach mucket (3) towards inside.

Detach mucket (4) from all doors in area of headliner.

Lay headliner downwards.

RA  Removing and installing/replacing headliner (with slide/tilt sunroof)

BMW AG - TIS

18.01.2013  12:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Headliner (with Slide_tilt Sunroof)|Page 1713 > < 2 RA Removing And Installing_replacing Headliner (without Slide_tilt Sunroof)