1 Series E87 118d (M47T2) 5-door
After fitting seat cover, enable OC3 mat with BMW diagnosis
system.
Enabling seat occupancy detector (OC3 mat):
•
Connect BMW diagnosis system
•
Release seat occupancy detector
•
Clear fault memory if necessary
Lever out clips (1).
Remove seat trim (2) downwards.
Installation:
Replace faulty clips (1).
Seat trim (2) must not be damaged.
Version with seat heating only:
Unlock plug connection (1) for seat heating and disconnect.
Disconnect cable straps.
Release wiring harness (2) from cable holders on seat
mechanism.
Important!
Feed the wiring harness carefully through the seat and
backrest mechanism as the edges of the frame can be sharp.
Release screw (1).
Remove trim (2) from inside of seat.
RA Replacing seat cover for left or right front seat (sport/manual)
BMW AG - TIS
18.01.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
