1 Series E87 118d (M47T2) 5-door
52 26 030
Removing and installing complete centre
armrest for rear seat backrest (through-
loading)
Unlock right backrest and tilt forwards.
Release screw.
Tightening torque 52 26 03AZ
.
Open centre armrest (1) and remove.
Version "without skibag" only
Important!
Risk of damage!
Pull cover trim (1) at top edges in stages and unclip.
Installation:
Clips may remain in the backrest frame and must be removed.
Replace faulty clips.
Note:
Forcefully pull top edge of cover trim (3) forwards and unclip
upper retaining lug (1).
Unclip the four retaining lugs (2) in succession.
RA Removing and installing complete centre armrest for rear seat backrest (through-
BMW AG - TIS
18.01.2013 13:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
