1 Series E87 118d (M47T2) 5-door
61 31 054
Removing and installing (or replacing version
with CCC) centre console switch cluster (after
03/2007)
Necessary preliminary tasks:
•
Remove middle trim for instrument panel
Note:
Ribbon cable (3) of centre console switch cluster (1) leads to
heater/air conditioner operator unit.
Unclip centre console switch cluster (1) from lower retaining
points (2) and upper retaining points (4) and remove in direction
of arrow from middle instrument panel trim (5).
Installation:
Make sure centre console switch cluster (1) engages correctly in
upper fastening points (4) and lower fastening points (2).
Make sure ribbon cable (3) is correctly routed.
RA Removing and installing (or replacing version with CCC) centre console switch cl
BMW AG - TIS
18.01.2013 13:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
