1 Series E87 118d (M47T2) 5-door
61 31 054
Removing and installing (replacing) centre
console switch cluster (version with CCC) (up
to 03/2007)
Necessary preliminary tasks:
•
Remove middle trim for instrument panel
•
Remove operator unit for heater/air conditioner
Lever out trim (1) at fastening points (2).
Feed out associated ribbon cable and remove trim (1) complete
with centre console switch cluster (3).
Replacement:
Lever out centre console switch cluster (1) at lower fastening
points (2).
Note:
Ribbon cable (3) of centre console switch cluster (1) leads to
heater/air conditioner operator unit.
Unclip centre console switch cluster (1) in direction of arrow from
trim (5) and remove.
Installation:
Make sure centre console switch cluster (1) engages correctly in
upper fastening points (4) and lower fastening points (2).
RA Removing and installing (replacing) centre console switch cluster (version with
BMW AG - TIS
18.01.2013 13:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -