bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

21 RA Removing And Installing (replacing) Front Controller|Page 2147 > < 21 RA Removing And Installing (replacing) Front Controller
Page 2
background image

Press cable retaining plate (1) downwards to gain access to
controller from below.

Important!

Sharp edges on centre console and on cable ties may cause
injury.

Carry out this operation with care.

 

Insert hand between cable retaining plate (3) and centre
console (2).

Press controller (1) upwards out of catch.

Disconnect associated plug connection and remove
controller (1).

Release screws (1) and remove controller (2) from trim (3).

Installation:

Retainers (1) of controller (2) must not be damaged or missing.

RA  Removing and installing (replacing) front controller

BMW AG - TIS

18.01.2013  13:54

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

21 RA Removing And Installing (replacing) Front Controller|Page 2147 > < 21 RA Removing And Installing (replacing) Front Controller