bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Light Control Unit|Page 2128 > < 4 RA Removing And Installing_replacing Start_Stop Switch
Page 1
background image

61 31 037

Removing and installing/replacing light
control unit

Special tools required:

00 9 317

Detach mucket (1) in area of trim (2) in direction of arrow.

Lever out trim (2) with special tool  00 9 317  at mounting
points (3) and remove.

Installation:

Retaining lugs (1) on trim (2) must not be damaged.

Note:

Unlock concealed catches (2) of light control unit (1) through
opening created by removed trim.

Unlock concealed catches (2) of light control unit (1) and feed
out light control unit (1) in direction of arrow.

Disconnect associated plug connection and remove light control
unit (1).

Installation:

Catches (2) of light control unit (1) must not be damaged.

RA  Removing and installing/replacing light control unit

BMW AG - TIS

18.01.2013  13:49

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing_replacing Light Control Unit|Page 2128 > < 4 RA Removing And Installing_replacing Start_Stop Switch