bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Cleaning Evaporator|Page 2404 > < 3 RA Cleaning Evaporator
Page 2
background image

Recycling:

Carry out the cleaning operation in a suitable washing bay as the
emerging cleaning agent escapes through the drain openings in
the transmission tunnel.

 

After completing cleaning, allow car to drip-dry for approx. 5
minutes.

Necessary preliminary tasks:

Remove rear underbody protection

Remove heater/air conditioner fan

Important!

Use special tool  64 1 270  on right hand drive models.

Connect special tool 64 1 260  (spray lance) to spray gun (2).

Insert spray lance 64 1 260  through opening (1) into fresh air
duct.

By moving spray lance (1) back and forth, spray a uniform
amount of cleaning agent onto evaporator.

Spray lance 64 1 260  shown on removed and cut-open
heater/air conditioner:

Spray lance 64 1 260  in upper end position (1)

Spray lance 64 1 260  in lower end position (2)

By moving spray lance back and forth, spray a uniform amount of
cleaning agent onto evaporator.

RA  Cleaning evaporator

BMW AG - TIS

18.01.2013  14:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

3 RA Cleaning Evaporator|Page 2404 > < 3 RA Cleaning Evaporator