1 Series E87 118d (M47T2) 5-door
64 52 ...
Replacing wiring harness on A/C compressor
(M47T2)
Note:
A/C compressor shown removed for purposes of clarity.
Release screw (1) and remove wiring harness (2) with cable
holder (3).
Tightening torque 64 52 6AZ
.
Important!
Replace wiring harness each time plug connection (1) is
disconnected.
Repair wiring harness may differ in colour from the original.
Unfasten plug connection (1) and disconnect.
Installation:
Plug connection (1) must snap firmly into place!
Seal must not be removed from plug!
Do not apply any (mineral) oil to seal.
Make sure cables are correctly laid.
Unlock plug connection (1) and remove from holder (2).
RA Replacing wiring harness on A/C compressor (M47T2)
BMW AG - TIS
18.01.2013 14:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
