1 Series E87 118d (M47T2) 5-door
11 12 Cylinder Head with Cover
Type
Thread
Tightening specification
Measure
1AZ Cylinder head bolts
(steel bolt)
M47TU2
M10x125
Replace screws
Tighten bolts from middle
in diagonal sequence in
outward direction.
Jointing torque
80 Nm
Release all bolts min. 180
°
from outside inwards
Jointing torque
50 Nm
1st angle of rotation
90
°
2nd angle of rotation
90
°
2AZ HVCA seal plug
M47TU2
M14x1.5
Replace screws
30 Nm
AZD Cylinder Head with Cover
BMW AG - TIS
18.01.2013 16:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
