bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 SBT Instrument Cluster E81, E87, E90, E91, E92, E93|Page 3825 > < 14 SBT Instrument Cluster E81, E87, E90, E91, E92, E93
Page 2
background image

Shift point indicator

Additional Check-Control messages for automatic engine start/stop system

[System overview ...]

On vehicles with multi-audio system controller (M-ASK) or Car Communication Computer (CCC):
Various displays appear in parallel on the Central Information Display (CID), e.g. information concerning CBS or
Check Control.

Brief description of components

The following components deliver signals to the instrument cluster:

Outside temperature sensor

The outside temperature sensor is connected to the junction box electronics (JBE).

Wires lead from the JBE to the instrument cluster.

The outside temperature is displayed on the LCD display in the instrument cluster.

When terminal 15 is OFF, the outside temperature sensor will continue to measure the temperature for a
maximum of 24 hours.

The signal from the outside temperature sensor is digitised in the instrument cluster. A computation model
compensates for the effect of the residual heat from the engine compartment on the signal.

A lower damping value is set at higher speeds or low engine temperatures. The true outside temperature can
only be reliably expected from a roadspeed of about 80 km/h.

[more ...]

SZL: Steering Column Switch

Two switches are located on the turn-signal/main-beam switch on the steering column switch cluster (SZL): an
axial switch and a rocker switch.

The following contents can be called up with the two switches and shown on the LCD display in the instrument
cluster:

On-board computer functions and Check-Control confirmation

Menu for the following functions (display is encoding-dependent, also in CCC or M-ASK, depending on
equipment fitted):

Dim instrument illumination

Scroll Check-Control message

Check engine oil level

Run Flat Indicator initialisation

Set time

Set date

CBS settings

Personal Profile settings
[more ...]

FRM: Footwell module

The footwell module (FRM) controls the interior and exterior lighting.

From the footwell module, information is sent through the K-CAN, e.g. whether or not the indicator and warning
lights stipulated by law need to be actuated.

JBE: Junction box electronics or junction box

SBT  Instrument cluster E81, E87, E90, E91, E92, E93

BMW AG - TIS

18.01.2013  18:40

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

14 SBT Instrument Cluster E81, E87, E90, E91, E92, E93|Page 3825 > < 14 SBT Instrument Cluster E81, E87, E90, E91, E92, E93