1 Series E87 118i (N43) 5-door
Pretension drive belt tensioning device at screw (1) as far as it
will go in direction of arrow and lock with special tool 11 3 340 .
Remove drive belt.
Important!
Tensioning device for drive belt is under high spring pressure.
Press in special tool 11 3 340 on tensioning device (1) as far
as it will go (see arrow).
Make sure drive belt is in correct installation position.
Assemble engine.
RA Replacing alternator drive belt (N43)
BMW AG - TIS
19.01.2013 17:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -