1 Series E87 118i (N43) 5-door
13 62 010
Removing and installing or replacing
differential pressure sensor (N43)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit.
•
Switch off ignition
Disconnect plug connection.
Release screws.
Tightening torque 13 62 1AZ
.
Pull differential pressure sensor (1) out of intake air manifold.
Installation:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing or replacing differential pressure sensor (N43)
BMW AG - TIS
19.01.2013 17:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -