1 Series E87 118i (N43) 5-door
51 47 ...
Removing and installing/replacing lip on
underbody panelling on left or right
Note:
Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.
The operation is described on the left side; proceed in the same
way for the right side.
Release expansion rivets (1).
Release catches (2).
Feed out lip (3) towards rear from underbody panelling and
remove.
Installation:
If necessary, replace faulty expander rivets (1).
Installation:
Catches (1) on lip (2) must not be damaged.
RA Removing and installing/replacing lip on underbody panelling on left or right
BMW AG - TIS
19.01.2013 21:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -