Removing and Installing Panel for Rear Lid - BMW 1 Series E87 118i (N43) 5-door
51 49 000
Removing and installing/replacing panel for
rear lid
Necessary preliminary tasks:
•
Remove trim for rear window frame on left and right
Pass emergency release (1) through panel (3).
Release screws (2).
Unclip panel (3) at clips (4 and 5) and remove towards
bottom.
Installation:
If necessary, replace faulty clips (1 and 2).
RA Removing and installing/replacing panel for rear lid
BMW AG - TIS
19.01.2013 22:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -