bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing A_C System Compressor (N43)|Page 2659 > < 2 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2657
Page 1
background image

64 52 521

Replacing A/C system compressor (N43)

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R134a refrigerant.

Follow safety instructions for handling refrigerant oil.

Avoid contact with refrigerant and refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Read and comply with notes on replacing compressor. 

Follow instructions for opening and replacing parts in
refrigerant circuit!

 

If A/C system is opened for more than 24 hours:

Replace desiccant insert for A/C system.

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Remove intake filter housing 

Remove A/C compressor drive belt 

Disconnect plug connection (1).

Release screw (2) and remove refrigerant line.

Unscrew bolt (3).

Do not yet disconnect refrigerant line - risk of damage!

Installation:

Replace sealing ring and moisten with refrigerant oil.

Tightening torque 64 52 1AZ

.

RA  Replacing A/C system compressor (N43)

BMW AG - TIS

20.01.2013  00:08

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing A_C System Compressor (N43)|Page 2659 > < 2 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2657