1 Series E87 118i (N43) 5-door
65 75 071
Removing and installing (replacing) module
for passenger compartment sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove complete ceiling light (rear)
Open retaining shook (1) in direction of arrow and remove
module for passenger compartment sensor (2) from trim (3).
Installation:
Retaining hooks (1) must not be damaged.
Arrow (4) must point in opposite direction to direction of travel.
Replacement:
Carry out programming/coding.
RA Removing and installing (replacing) module for passenger compartment sensor
BMW AG - TIS
20.01.2013 00:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -