1 Series E87 118i (N46) 5-door
Unlock carrier plate (1) and raise in direction of arrow.
Unlock tabs (1) and remove sliding safety catch (2) in direction
of arrow.
Unlock tab (3) in direction of arrow and slide out plug (4) in
direction of arrow.
Withdraw profile seal from electronics box.
Installation:
To ensure leak-tightness, make sure profile seal is correctly
seated in electronics box.
Pull wiring harness (1) at rubber pieces (2) from holder.
Unlock plug (1) and remove.
RA Replacing wiring harness section for transmission/lambda (N46, N46T)
BMW AG - TIS
20.01.2013 10:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
