1 Series E87 118i (N46) 5-door
34 33 071
Replacing vacuum hose for brake booster
(N46)
Necessary preliminary tasks:
•
Read and comply with General Information.
•
Remove lower section of microfilter housing
•
Remove ignition coil cover
Important!
Before beginning work, fully press the brake pedal several
times to reduce the vacuum pressure in the brake booster.
Unlock quick-release fastener (1) and pull out vacuum line (2).
Unfasten hose clip (1).
Installation:
Replace hose clip.
Disconnect vacuum hose (2) from vacuum pump.
Remove vacuum line.
RA Replacing vacuum hose for brake booster (N46)
BMW AG - TIS
20.01.2013 12:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -