1 Series E87 118i (N46) 5-door
-
Unfasten plug connection (1) and disconnect.
-
Detach water drain hoses.
-
Helper must hold glass slide/tilt sunroof to prevent it falling out.
-
Release screws in marked area and carefully lower glass slide/tilt sunroof.
Tightening torque: 54 12 02AZ
.
Important!
Do not damage any surrounding parts when removing the glass slide/tilt sunroof.
-
Remove glass slide/tilt sunroof completely (through rear lid at rear).
Installation:
If necessary, remove fabric adhesive tape.
To stop grating noises, secure all screws (1) prior to installation
with plastic washers (2).
If the standard screws can no longer grip, use "repair screws"
(have larger threads).
Important!
Do not crush any cables when fitting the glass slide/tilt
sunroof.
Initialize glass slide/tilt sunroof.
RA Removing and installing complete glass slide/tilt sunroof
BMW AG - TIS
20.01.2013 15:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -