1 Series E87 118i (N46) 5-door
Remove front underbody protection.
Note:
Secure compressor (2) against falling out.
Release bolt (1) and then bolts (2).
Remove bracket (not shown in illustration).
Feed out compressor (3) towards bottom.
Installation:
Check guide bushes and replace if necessary.
Tightening torque 64 52 3AZ
.
After installation:
•
Evacuate and fill A/C system
•
Assemble engine
RA Replacing A/C compressor (N45 / N46)
BMW AG - TIS
20.01.2013 17:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -