1 Series E87 120d (M47T2) 5-door
Raise engine at vibration damper in direction of arrow.
Slide in special tool 11 7 360 in direction of arrow between
front axle carrier and engine oil sump.
Unscrew nut (1).
Remove grounding strap (2).
Unlock quick-release fastener (1) and disconnect.
Release coolant hose (3) from retaining clip (2).
Remove coolant hose (3).
Installation:
Quick-release couplings of coolant hoses are correctly fitted when
they snap into place with a clearly audible click.
Suspend special tool 11 0 000 from engine crane.
Suspend special tool 11 0 000 from the designated mounting
eyelets (1) only.
Detach engine wiring harness from electronics box and secure to
engine.
Lift engine out with crane.
RA Removing and installing engine (M47T2)
BMW AG - TIS
21.01.2013 21:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -