1 Series E87 120d (M47T2) 5-door
Note:
Before removing pistons, remove carbon deposits from
cylinder walls.
Unscrew conrod bearing cover.
Remove connecting rods with pistons from cylinder head end.
Lift out retaining ring and press out piston pin.
Important!
Piston and piston bolts are paired and must not be fitted
individually.
Installation:
Installation of all pistons is described separately from removal.
Assembly sequence for removal and installation is different.
RA Removing and installing or replacing all pistons (M47TU / M47T2)
BMW AG - TIS
21.01.2013 21:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -