1 Series E87 120d (M47T2) 5-door
Illustration shows exhaust system removed:
Cutting line between centre silencer (2) and rear silencer (1).
Determine pipe length on new rear silencer (1).
Carry over dimension to faulty rear silencer (1) and mark cutting
line.
Unfasten nut.
Installation:
Tightening torque, 18 20 6AZ.
Cut exhaust pipe with special tool 00 2 210 at marked points.
Remove final silencer.
Deburr exhaust pipe.
Illustration shows exhaust system removed:
Connect rear silencer to centre silencer.
Installation:
Align clamping sleeves so that:
•
Nuts point downwards.
•
Cutting line is in middle of clamping sleeve.
•
There is sufficient spacing to adjoining components.
RA Replacing rear silencer (M47TU2, N47)
BMW AG - TIS
21.01.2013 22:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
