1 Series E87 120d (M47T2) 5-door
51 11 141
Removing and installing/replacing lower
section of bumper trim
Necessary preliminary tasks:
•
Remove front bumper trim
•
Remove both fog lamps
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Release expansion rivet (1).
Unhook catches (2) from upper section of bumper trim (3).
Remove lower section of bumper trim (4) from upper section (3).
Installation:
Catches (1) on lower section of bumper trim (2) must not be
damaged.
RA Removing and installing/replacing lower section of bumper trim
BMW AG - TIS
22.01.2013 01:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -