1 Series E87 120d (M47T2) 5-door
Carefully unclip door trim panel (1) at top from retainers (2).
Unhook Bowden cable (1) from door lock (2).
Disconnect all plug connections and remove door trim panel.
Installation:
Make sure clips are installed in correct position.
Clips (1) are gray and longer than the other clips.
Clip (2) is brown and shorter than the other clips.
Remaining clips are white.
If necessary, replace faulty clips.
Installation:
After assembling the door trim panel proceed as follows:
-
Open door window.
-
Lock with vehicle key.
-
Check for ease-of-movement on retaining button linkage
-
If necessary, align linkages
RA Removing and installing left or right front door trim panel
BMW AG - TIS
22.01.2013 02:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
