1 Series E87 120d (M47T2) 5-door
•
Remove solar sensor
Release screws (1).
Release screws (2).
Pull back instrument panel trim (3) in direction of arrow.
If necessary, disconnect available plug connections and remove instrument panel trim (3).
Installation:
Make sure guides (1) of instrument panel trim (2) are correctly
seated in mountings.
Make sure seals are correctly seated on air ducts.
RA Removing and installing instrument panel trim
BMW AG - TIS
22.01.2013 02:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -