1 Series E87 120d (M47T2) 5-door
Installation:
Slide sleeve (1) over locking pin (2).
Make sure sleeve (1) is correctly engaged in cover housing (3).
Replacement:
Release screws (1).
Disengage emergency actuation pull strap (2) from retainer (4)
and remove towards front.
If necessary, unclip locking pin (3) in direction of arrow from
servodrive for tank filler flap.
Unclip retainer (4) from servodrive for tank filler flap (3).
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
22.01.2013 04:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -