1 Series E87 120d (N47) 5-door
11 13 000
Removing and installing, sealing or replacing
oil sump (N47, N47S)
Special tools required:
•
00 0 200
•
00 0 201
•
00 0 202
•
00 0 204
•
00 0 208
•
11 0 000
•
11 8 780
Necessary preliminary tasks:
•
Remove acoustic cover.
•
Remove radiator cowl.
•
Remove engine underguard at front/rear.
Remove exhaust system.
•
Drain engine oil.
•
Lower front axle support.
Note:
Front axle alignment is not required.
Assemble special tool 00 0 200 with special tools 00 0 201 /
00 0 202 / 00 0 204 / 00 0 208 and fit.
Suspend special tool 11 0 000 from front and rear engine
suspension.
Contacts (1) must rest on screws of side walls.
Important!
Do not exceed lifting height under any circumstances.
Raise engine max. 20-25 mm.
Note:
Picture shows E81.
RA Removing and installing, sealing or replacing oil sump (N47, N47S)
BMW AG - TIS
22.01.2013 13:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
