1 Series E87 120d (N47) 5-door
11 14 110
Removing and installing, sealing/replacing
timing case cover at rear (N47, N47S)
Special tools required:
•
00 9 120
•
11 8 815
Necessary preliminary tasks:
•
Remove engine.
•
Remove flywheel.
•
Remove cylinder head.
•
Removing oil pan.
Release screws (1).
Release screw holding high pressure pump.
Remove sheet metal gasket (1).
Check close-tolerance sleeves (2) for damage, replace if
necessary.
RA Removing and installing, sealing/replacing timing case cover at rear (N47, N47S)
BMW AG - TIS
22.01.2013 13:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
