1 Series E87 120d (N47) 5-door
Place the camshaft sprocket with timing chain on the intake
camshaft such that bolts (1) are located in the centre of the slots.
Insert bolts (1).
Tighten bolts (1) to 10 Nm.
Release bolts (1) again by a 90
°
turn.
Install chain tensioner (1).
Tightening torque: 11 12 2AZ
.
Fit special tool 11 8 760 on exhaust camshaft.
Note:
Special tool 11 8 760 must lie flush on cylinder head.
Marks on both camshafts (A and E) must agree (be aligned) (see
illustration).
RA Replacing inlet camshaft (N47, N47S)
BMW AG - TIS
22.01.2013 14:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -