bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
1 RA Removing And Installing_replacing Oil-water Heat Exchanger (N47, N47S)|Page 414 > < 1 RA Removing And Installing_replacing Guide Tube For Dipstick (N47, N47S)

1 Series E87 120d (N47) 5-door

Page 1
background image

11 44 001

Removing and installing/replacing oil-water
heat exchanger (N47, N47S)

Necessary preliminary tasks:

•

Remove main flow oil filter.

Release screws (1).

Remove plate together with heat exchanger (2).

If necessary, use a suitable tool to remove heat exchanger (1).

Note:

See illustration.

Remove sealing elements (1).

Installation:

Replace all O-rings.

RA  Removing and installing/replacing oil-water heat exchanger (N47, N47S)

BMW AG - TIS

22.01.2013  14:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Oil-water Heat Exchanger (N47, N47S)|Page 414 > < 1 RA Removing And Installing_replacing Guide Tube For Dipstick (N47, N47S)