1 Series E87 120d (N47) 5-door
Unlock and release control unit module (1). Unlock and disconnect
plugs (2).
Release retaining clip (1) with a small screwdriver in direction of
arrow. Pull out plugs (2) (injector wiring harness) towards rear.
Holder for plug connector on cylinder head cover. Unlock and
disconnect plug connections for oxygen sensor (1), exhaust
temperature sensor (2), term. 50 (3) and exhaust pressure
sensor (4). Open cable ties.
Release retaining screw of cable penetration in cylinder head
cover.
Unlock and disconnect plugs for rail pressure regulator (1) and
camshaft sensor (2).
RA Replacing wiring harness section for engine (N47, N47S)
BMW AG - TIS
22.01.2013 14:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
