1 Series E87 120d (N47) 5-door
13 62 651
Replacing exhaust-gas pressure sensor
(N47)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Switch off ignition
Warning!
Scalding hazard!
Only perform this task on an engine that has cooled down.
Unlock plug (1) and remove.
Unlock exhaust-gas pressure sensor (2) at holder.
Remove exhaust-gas pressure sensor.
Remove hose lock, detach hose.
Installation:
Check stored fault messages.
Now clear the fault memory.
RA Replacing exhaust-gas pressure sensor (N47)
BMW AG - TIS
22.01.2013 14:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -