Removing or Replacing Zero Gear Sensor on BMW 1 Series E87 120d
23 14 550
Removing/replacing zero gear sensor
Important!
After installing the zero gear sensor, it is necessary to teach in
the position of the zero gear sensor again.
Adjustment is carried out with the "Service function" of the DIS
Tester (learn/write zero gear sensor).
Necessary preliminary tasks:
•
Lower transmission
Tasks are described in Removing transmission.
Disconnect plug connection (1) on zero gear sensor.
Release screws (2).
Remove zero gear sensor.
Tightening torque 23 14 2AZ.
RA Removing/replacing zero gear sensor
BMW AG - TIS
22.01.2013 14:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
