1 Series E87 120d (N47) 5-door
51 22 300
Removing and installing/replacing window
cavity cover strip on rear door on left or right
Special tools required:
•
00 9 324
Important!
Observe procedure for using special tool 00 9 324 .
The "Instructions on fitting window guide seals" serve as the
basis for this repair instruction and must be observed without
fail.
Important!
If reusing the existing window cavity cover strip (1), make
sure it is not bent.
Lever out window cavity cover strip (1) with special tool
00 9 324 (starting at B-pillar).
Installation:
Moisten window cavity cover strip (1) prior to fitting with
approved anti-friction agent .
Window cavity cover strip (1) must be flush at front and rear with
door edge.
RA Removing and installing/replacing window cavity cover strip on rear door on left
BMW AG - TIS
22.01.2013 17:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
