1 Series E87 120d (N47) 5-door
61 62 060
Removing and installing/replacing rear
window wiper motor
Necessary preliminary tasks:
•
Remove rear window wiper arm
•
Remove upper rear window frame trim
•
Remove trim for rear window frame on right and left
•
Remove panel for rear lid
Disconnect plug connection (1).
Disconnect hose (3) for rear window washer system.
Release screws (4) and remove rear window wiper motor (2).
Tightening torque 61 62 8AZ
.
Installation:
Check wiper shaft grommet for signs of damage.
If necessary, replace grommet.
RA Removing and installing/replacing rear window wiper motor
BMW AG - TIS
22.01.2013 19:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
