bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

17 RA Replacing Drive Unit For Right Adaptive Headlight (up To 03_2007)|Page 2423 > < 16 RA Replacing Drive Unit For Right Adaptive Headlight (from 03_2007)|Page 2421
Page 1
background image

63 12 896

Replacing drive unit for right adaptive
headlight (up to 03/2007)

Warning!

Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).

Work on the entire xenon lighting system (ignition unit, control
unit and lamp) may only be carried out by specialist
personnel.

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Note:

Headlight shown removed for purposes of clarity.

 

Unlock spring wire clips (1) in direction of arrow.

Remove cover (2) in upward direction from headlight (3).

 

Installation:

Make sure cover (2) is correctly seated on headlight (3).

Disconnect plug connection (1).

Release screws (2).

Remove drive for adaptive headlight (3) in direction of arrow from
headlight (4).

RA  Replacing drive unit for right adaptive headlight (up to 03/2007)

BMW AG - TIS

22.01.2013  20:14

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

17 RA Replacing Drive Unit For Right Adaptive Headlight (up To 03_2007)|Page 2423 > < 16 RA Replacing Drive Unit For Right Adaptive Headlight (from 03_2007)|Page 2421