1 Series E87 120d (N47) 5-door
72 12 000
Removing and installing or replacing airbag
module on passenger side
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt pretensioners.
Follow instructions for unlocking and locking airbag plug
connections.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Remove luggage compartment floor trim
•
Disconnect battery negative lead
•
Remove right glove compartment with housing
Car and airbag module up to 03/2006:
Unlock plug connection (1) and disconnect.
Note:
Secure airbag module on passenger side (3) against falling out.
Release screws (2).
Tightening torque 72 12 01AZ
.
Remove airbag module on passenger side (3) towards bottom.
Car and airbag module from 03/2006:
Unlock plug connections (1) and disconnect.
Note:
Secure airbag module on passenger side against falling out.
Release screws (2).
Tightening torque 72 12 01AZ
.
Remove airbag module on passenger side towards bottom.
RA Removing and installing or replacing airbag module on passenger side
BMW AG - TIS
22.01.2013 21:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -