1 Series E87 120i (N43) 5-door
Disconnect quick-release coupling and place vent line (1) to one
side.
Installation:
Make sure quick-release coupling is fitted correctly.
Release quick-release coupling and detach fuel line (1).
Catch and dispose of escaping fuel.
Installation:
Make sure quick-release coupling is fitted correctly.
Check fuel system for leaks.
Checking function of Digital Engine Electronics (DME)
Seal fuel lines with special tools 13 5 281 and
13 5 282 .
Warning!
Risk of injury!
Observe following instructions relating to special tool:
1.
Prior to each use, check the special tools for defects,
modifications and operational reliability.
2.
Damaged/modified special tools must not be used!
3.
No changes or modifications may be made to the special
tools!
4.
Keep special tools dry, clean and free of grease.
RA Securing engine in installation position (N43)
BMW AG - TIS
23.01.2013 06:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -